Changing the Blade on the 45 Degree Cartridge

The 45° metal black blade cartridge* is designed to cut 45° bevels on standard 4-ply matboard.

The 45° metal black blade cartridge is labeled 45° on the end.

Notes:

• Your hardware may look different than the model pictured, but the process is still the same.

• The 45° blade cartridge does not support blade depths above 16.

• *Older systems may have a 45° plastic black blade cartridge.

Push the blade cartridge release down to eject the blade cartridge.

Remove the blade from blade cartridge.

Mind the sharp edge.