Check out our new How To section at: How To...

Using the Deboss Cartridge or the Crease Cartridge when Cutting Boxes

Owned by dani.simmonds
Aug 22, 2024
1 min read

Using the Deboss Cartridge or the Crease Cartridge when Cutting Boxes

Using the Deboss Cartridge or the Crease Cartridge when Cutting Boxes

  • On thicknesses of 3/32” and below, it will use the Deboss cartridge to create fold lines when cutting.

 

Deboss Cartridges

  • On thicknesses of 1/8” and above will use the Crease cartridge to create fold lines when cutting.

Crease Cartridge

  • The outside of the box is cut with the 90° Cartridge.