Tool Line Too Far Down

Tool Line Too Far Down

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

For Additional Information:
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

Vertical Adjustment

Vertical Adjustment Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

FrameShop 7x