V-Groove Outside Cut has a Flare

A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

The Rotation on V-Grooves controls for Swoops or Flares on V-Grooves.

Open

Flares on the Exterior Cut of a V-Groove

Open

Outside Rotation for V-Grooves

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.