Check out our new How To section at: How To...

V-Groove Blade Depth Value

Owned by dani.simmonds
Last updated: Aug 15, 2024
2 min read

V-Groove Blade Depth Value

V-Groove Blade Depth Value

  • Select the desired V-Groove Blade Depth value in the V-Groove field. 

    • This value should match the number on the physical Blade Depth dial.

  • If desired, enter notes in the Label field for future reference for this particular Blade Depth.

  • Entering a Label for a Blade Depth value will be displayed from the Blade Depth Quick Select dropdown control.

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Closed V-Groove
BevelType45VGSelect70800.jpg
Normal Bevel Closed V-Groove Configurations

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations