Check out our new How To section at: How To...

Cut Speed Percentage

Owned by dani.simmonds

Aug 15, 2024

2 min read

Cut Speed Percentage

Cut Speed Percentage

Enter the desired Cut Speed Percentage for each Cartridge type.
- 100% is cutting at Full Speed.
- 50% is cutting at Half Speed.
When that particular Cartridge is used next, it will use the new Cut Speed entered.
Slowing down the cut speed can help when cutting intricate designs to help prevent the Head from skipping on tight corners.

For Additional Information:
See Variable Pressure Optimization (VPO) for more information.
See Adjusting the Air Pressure for Typical Matboard for more information.
See Adjusting the Air Pressure for Dense Matboard for more information.
See Adjusting the Air Pressure for Extra Dense Matboard with the 90° Cartridge for more information.

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

Edit Each Cartridge Percentage Speed. 100% is cutting at full speed, 50% is cutting at half speed.

This example shows that the 90 Degree Cartridge will cut at 50% speed.