The 90° Bevel Drop is created by cutting a 90° Right Angle into the matboard. The matboard core is hidden from view since there is no Bevel when cutting at a 90° Right Angle. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within the Design Editor.
Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.
| 90° Bevel Drop and Cartridge |
