Use the Cut Layers Stacked toggle to cut and assemble the mats while still in the machine. Stacked mats can only be cut from the Back, so it cannot include any cut-from-front elements, such as V-Grooves.
Click the Cut Layers Stacked toggle to On to use the Cut Layers Stacked feature. Make sure you are cutting from the Back of the mat, as you would be assembling the mats as you cut. The Cut Layers Stacked feature will cut from the top mat down, allowing you to adhere the mats together on the machine as they cut. Once the design is finished cutting, it is also finished being assembled.
NOTE: Only one design can be cut at a time using Cut Layers Stacked. The Stacked Mat feature disables the Cut the Outside function, so you will have to use pre-cut matboard or manually trim the outside afterwards.Â
| Toggle Cut Layers Stacked On Allows You to Adhere the Mats Together as they Cut |
