Use the Order Cuts tab to change the cut order of a design. You may want to do this if you are having problems with fallouts sliding behind the mat you are cutting. Changing Cut Order and Changing Start Cut Points may help resolve some of these issues.

Click on Options > Show Cut Order Numbers to display the cut order numbers on the objects. 

The cut order numbers will be displayed next to each object.

Select the desired bevel/cartridge type you wish to change the cut order for from the Bevel/Cartridge Type Selection section by clicking the radio button next to it. 

Only the objects matching the bevel/cartridge type selection will be displayed. 

The other bevel/cartridge types of the design on the screen will be muted.

Click on the specific object you want to edit*. 

*Cut Order Number size exaggerated here for clarity.

Click on the desired cut order direction button. 

• Cut Earlier will change the selected object to cut earlier in the cut sequence.

• Cut Later will change the selected object to cut later in the cut sequence.

The object will move up/down in the cut order.

If we click the button again, it will move once more in the cut order. The object has moved up once more in the cut order.