On the Configurations screen, select the Cartridge tab and the appropriate Bevel Type from the Current Bevel Type dropdown menu.
For Bladed Cartridges, choose the correct Bevel Type based on Cut Direction: Front (marked "Front of Mat") or Back (unlabeled).
For Non-Bladed Cartridges, choose the appropriate Cartridge Type if applicable.
Too Long | Too Short |
The Crease Backup adjusts the Cartridge’s Plunge into the Matboard. Full Definition Backup too Long: Decrease
| The Crease Backup adjusts the Cartridge’s Plunge into the Matboard. Full Definition Backup too Short: Increase
|
  Click [-] or [+] button in the desired field several times, test cut, and adjust as needed.
|