Troubleshooting Oval V-Grooves

Adjusting Oval V-Grooves

The Troubleshooting screen will display the Feather and Bump sections for Oval V-Grooves.

Select which part of the V-Groove to edit (Outside, Inside, Both) by clicking the desired radio-buttons between the Less Feather and Less Bump sections.
Select which part of the object to edit by clicking the Less Feather or Less Bump buttons.
If the Outside cut of the Oval V-Groove has a Feather, select Less Feather.
If the Outside cut of the Oval V-Groove cuts with a Bump, select Less Bump.
If the Inside cut of the Oval V-Groove has a Feather, select Less Feather.
If the Inside cut of the Oval V-Groove cuts with a Bump, select Less Bump.

Feather on an Oval V-Groove

A Feather is a Fringe of material where the cut starts and ends on the Oval V-Groove’s Exterior or Interior cut.
- If the Oval V-Groove’s Exterior has a Feather, Increase the Outside Oval Rotation.
- If the Oval V-Groove’s Interior has a Feather, Decrease the Inside Oval Rotation.

Bump on an Oval V-Groove

A Bump is a Lump of material where the cut starts and ends on the Oval V-Groove’s Exterior or Interior cut.
- If the Oval V-Groove’s Exterior has a Bump, Decrease the Outside Oval Rotation.
- If the Oval V-Groove’s Interior has a Bump, Increase the Inside Oval Rotation.

🛠️ Click the Minus [-] or Plus [+] button in the desired field several times, perform a test cut, and continue adjusting until satisfied.