You are viewing an old version of this content. View the current version.
Compare with Current View Version History
« Previous Version 81 Next »
A Swoop is where the corners Curve Toward the Opening on the V-Groove’s Interior or Exterior cut.
If the V-Groove’s Exterior has a Swoop, Decrease the Outside Rotation.
If the V-Groove’s Interior has a Swoop, Increase the Inside Rotation.
🛠️ Click the Minus [-] or Plus [+] button in the desired field several times, perform a test cut, and continue adjusting until satisfied.
Troubleshooting Non-Oval Objects
Troubleshooting V-Grooves
