Swoop on V-Groove
A Swoop in a V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove. If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation. If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation. The Rotation on V-Grooves controls for Swoops or Flares on V-Grooves. Swoop on the Outer Cut of a V-Groove Swoop on the Inner Cut of a V-Groove A Swoop in the outside cut of the V-Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove. If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation. The Outside Rotation for V-Grooves controls for Swoops or Flares on V-Grooves. A Swoop on the inside cut of the V-Groove is where the corners Curve Inward toward the opening on the inside cut of the V-Groove. If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation. The Inside Rotation for V-Grooves controls for Swoops or Flares on V-Grooves. When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |  |