You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 21 Current »
The 52° plastic purple blade cartridge is designed to cut 52° bevels on standard 4-ply matboard.
Use the Configurations screen to adjust how the 52 Degree Cartridge is being cut.
With the desired design on the Cut Preview screen, click the Configurations button to open the Configurations screen.
Select the 52 Degree Cartridge tab to edit the Configurations for the 52 Degree Cartridge.
Select the Bevel Type from the Current Bevel Type dropdown control.
For Additional Information: See Editing the 52 Degree Configurations.
Each Bevel Type, including whether cut from the Front or Back, has a designated configuration in the Current Bevel Type dropdown menu.
Be sure to select the appropriate Front/Back Bevel Type before adjusting the configurations.
Normal Bevel (Cut From Back)
Normal Bevel - Front of Mat (Cut From Front
