">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 18 Next »

Selecting the 52° Blade Cartridge

  • The 52° Blade Cartridge cuts the bevel angle on the matboard at 52°.

52 Degree Cartridge

  • The 52° Cartridge cuts the Bevel Angle on the matboard at 52°.

  • This Bevel Angle is displayed on the Front or the Back of the mat depending upon the selected Bevel Type.

52BevelOpeningCartridges70800.png

  • Click on the opening.

  • Click on the Properties Tab.

  • Click the Cartridge Icon on the desired layer.

Template Object

  • Select the 52° Bevel Cartridge.

  • Only the blade cartridges that can be used on Templates are the 45°, 52° and 90° cartridge.

Templates Definition

  • Templates are specialized parametric shape generators created by Wizard that can be cut or applied with the non-blade cartridges.

Non-Template Object

  • Select the 52° Bevel Cartridge.

  • If the selected object is a non-template, all of the licensed applicable cartridges will be displayed.

    • The cartridges not available in the current scenario are either grayed out or not displayed.

Non-Template Objects

New Cartridge Selected

  • The current layer displays the selected cartridge.

Go to the Cut Preview

  • No labels