This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 7 Next »

Take a Photo to Draw Over in Trace

(Requires FrameShop Visualization)

You must have the FrameShop Visualization software activated in order to take pictures through the software.

Open Trace. 

Click on the Vectorize tab. 

Click the Take Picture button.

Select desired camera if necessary.

Click the Take Picture button on the Camera Capture screen.

The photo is displayed in Trace.

Enter the desired size of the image width/height under Design Bounds. 

Draw over/around the image or Vectorize it as desired.

  • No labels