This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 26 Current »

45 Degree Plus Outside

The 45 Degree Plus Cartridge* cuts the outside with a 45° bevel on thicker matboard such as 8-ply. 

*Older systems may have a yellow plastic 45°+ Cartridge.

Select the 45 Degree Plus Outside Bevel Type

Select the 45°+ Tab on the Configurations screen. 

Select the specific Outside bevel type from the Current Bevel Type dropdown control.

  • Outside

  • Outside-Front of Mat

Select the Area of Concern for the 45 Degree Plus Outside Cut Below:

45 Degree Plus Outside Cuts Wrong Depth When Using a SKU

Select this topic to adjust the Depth Bias.

45 Degree Plus Outside Does Not Pause for Blade Change when Cutting

Select this topic to adjust the Plunge Count.

45 Degree Plus Circle/Oval Outside Rotation Adjustments Using the Circle/Oval Rotation Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

45 Degree Plus Outside Exterior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

45 Degree Plus Outside Exterior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

45 Degree Plus Outside Exterior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

45 Degree Plus Outside Exterior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

45 Degree Plus Outside Interior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

45 Degree Plus Outside Interior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

45 Degree Plus Outside Interior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

45 Degree Plus Outside Interior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

45 Degree Plus Outside Cuts the Wrong Size

This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.

45 Degree Plus Outside has a Swoop 

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

45 Degree Plus Outside has a Flare 

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

45 Degree Plus Oval Outside has a Bump 

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

45 Degree Plus Oval Outside has a Feather 

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

  • No labels