90 Degree Drop | |
|---|---|
The 90 Degree Cartridge cuts the drop with a 90° cut and leaves no bevel. | |
 |
Select the 90 Degree Drop Bevel Type | |
|---|---|
Select the 90° Tab on the Configurations screen. Select the specific Drop bevel type from the Current Bevel Type dropdown control. Bevel displayed for clarity - the 90° Cartridge cuts with no bevel displayed.
| |
 |
Select the Area of Concern for 90 Degree Drops Below: |
|---|
90 Degree Drop |
|---|
Cuts the Wrong Depth When Using a SKU | |
|---|---|
Select this topic to adjust the Depth Bias. | |
 |
90 Degree Drop Does Not Pause for Blade Change when Cutting |
|---|
Select this topic to adjust the Plunge Count. | |
 |
90 Degree Circle/Oval Drop Rotation Adjustments Using the Circle/Oval Rotation |
|---|
Utility |
|---|
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals. | |
 |
90 Degree Drop Exterior Backup is too Long |
|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. | |
Bevel is shown for clarity of blade movement. |  |
90 Degree Drop Exterior Backup is too |
|---|
Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. | |
Bevel is shown for clarity of blade movement. |  |
90 Degree Drop Exterior Overcut is too Long |
|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. Bevel is shown for clarity of blade movement. | |
 |
90 Degree Drop Exterior Overcut is too Short |
|---|
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. | |
Bevel is shown for clarity of blade movement. |  |
90 Degree Drop Interior Backup is too Long |
|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. Bevel is shown for clarity of blade movement. | |
 |
90 Degree Drop Interior Backup is too Short |
|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. Bevel is shown for clarity of blade movement. | |
 |
90 Degree Drop Interior Overcut is too |
|---|
Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. | |
Bevel is shown for clarity of blade movement. |  |
90 Degree Drop Interior Overcut is too |
|---|
Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. | |
Bevel is shown for clarity of blade movement. |  |
90 Degree Drop Cuts the Wrong |
|---|
Size | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. | |
Bevel is shown for clarity of blade movement. |  |
90 Degree Drop has a Swoop | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Rotation. | |
 |
90 Degree Drop has a |
|---|
Flare | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Rotation. | |
|
90 Degree Oval Drop has a |
|---|
Bump | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. | |
 |
90 Degree Oval Drop has a |
|---|
Feather | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. | |
 |
Troubleshooting |
|---|
Button | |
|---|---|
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. | |
 |