Versions Compared

Old Version 18

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Creating a Multi-Layered Oval Inset

Info

  • This lesson shows how to make a Multi-Layer Oval Inset mat.

Image Removed
Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFEBE6
Image Added

Design in FrameShop, Bring into

PathTrace

Trace

  • First we need to make sure we are designing the layers in the correct order for these instructions.

  • On the FrameShop Main Page, click Admin and stay on the Defaults tab.

  • Under Layer Direction select Bottom Up if it is not already set to that.

  • Click Save and return to the Main Page.

    • You can change this back to the original setting later if desired.

Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFEBE6

  • Layer Direction: Bottom Up is the preferred direction.

    • When you Offset an object to create another layer, that new layer will be the Top layer.

  • Layer Direction: Top Down is not recommended.

    • When you Offset an object to create another layer, that new layer will be the Bottom layer, even though it is larger than the original object.

2LayerLetterMatDefaultDirection800.pngImage Added

  • Place an 8.75 x 11.75” #102 Oval Template with two Layers on the FrameShop Design Editor. 

  • Bring in two small ovals that are 3x5.

  • Edit the small ovals and make them four layers.

    • Width of the Inner Reveal is how much of the Inner Mat shows (i.e., .25).

    • Width of the Middle Reveal is the width of the Bridge between the two objects (i.e., .5).

    • Outer Reveal is the Inner Mat of the Bridge on the large object side (i.e., .25).

Bring Design into Trace

Image Removed

  • The View from Back toggle toggles between viewing the design from the Front or from the Back of the mat.

Image Removed
Image Added

Break All Intersections

Info

  • Because of the complexity of this design, it may be easier to Break All of the Intersections and reconnect the desired Arcs.

Expand
titleArc Definition

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleSpline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points:

Initial Position (called an Anchor)

Two Separate Middle Points (called Handles) which can be moved to alter the shape.

Terminating Position (called an Anchor)

Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

Arcs are provided for those that prefer to draw with them.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleBreak Definition

The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

See: Break All Intersections Function

Image RemovedImage Added

Join Segments / Close Circuit

  • The design has been Broken and consists of many tiny Arcs.

  • Zoom In/Out as needed to select the smaller Arcs.

Expand
titleBreak Definition

The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

See: Break All Intersections Function

Expand
titleArc Definition

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleSpline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points:

Initial Position (called an Anchor)

Two Separate Middle Points (called Handles) which can be moved to alter the shape.

Terminating Position (called an Anchor)

Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

Arcs are provided for those that prefer to draw with them.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Image RemovedImage Added

  • Holding down the CTRL key, click on each segment that is forming the Inner Layer of the Lower Oval in the order they are sitting.

Image RemovedImage Added

  • When the Oval is completely selected, click Join.

Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

See: Join Tool Function

See: Auto Join Segments Function

  • The Oval is now a connected singular object.

Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

See: Join Tool Function

See: Auto Join Segments Function

Image RemovedImage Added

  • Connect the Arcs making up the next layer of the Bottom Oval in the same manner.

Expand
titleArc Definition

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleSpline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points:

Initial Position (called an Anchor)

Two Separate Middle Points (called Handles) which can be moved to alter the shape.

Terminating Position (called an Anchor)

Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

Arcs are provided for those that prefer to draw with them.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Image RemovedImage Added

  • Connect the Arcs for the Bottom Layer of the Top Oval.

    • Notice that this will use Arcs from the original outer layer of the Bottom Oval, to form part of this Top Oval.

Image RemovedImage Added

  • Connect the Arcs for the next layer of the Top Oval in the same manner.

Image RemovedImage Added

  • Connect the Inner Layer of the Large Oval.

    • Notice that this will use Arcs from the original Outer Layer of the Smaller Ovals, to form part of this Large Oval.

Image RemovedImage Added

  • Connect the Arcs for the next layer of the Large Oval in the same manner.

Image RemovedImage Added

  • The Ovals are now connected.

Info

  • NOTE: It is not necessary to delete the leftover Arcs.

    • Because the spare Arcs are not connected, the user can simply Trace the desired objects.

    • The leftover Arcs are deleted here for illustration purposes.

Expand
titleArc Definition

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleSpline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points:

Initial Position (called an Anchor)

Two Separate Middle Points (called Handles) which can be moved to alter the shape.

Terminating Position (called an Anchor)

Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

Arcs are provided for those that prefer to draw with them.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

See: Tracing the Design

Image RemovedImage Added

Tangify/Convert to Splines

  • Click Edit > Convert Arcs to Splines. The Splines can be tangified with less distortion, which will give a smoother cutting path for the design.

  • Click on Edit > Tangify all Circuits. This makes each arc tangent to each other for smoother cutting.

  • The degree of tangification is set in the Tangify field; the default is six degrees.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Expand
titleArc Definition

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleSpline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points:

Initial Position (called an Anchor)

Two Separate Middle Points (called Handles) which can be moved to alter the shape.

Terminating Position (called an Anchor)

Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

Arcs are provided for those that prefer to draw with them.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleConvert Arcs to Splines Definition

The Convert Arc to Splines process will convert the Arcs to Splines /wiki/spaces/FrameShop8x/pages/1942513851 which are easier to tangify to make cuts smoother.

See: Arcs Definition

See: Arcs Tool Function

See: Splines Definition

See: Splines Tool Function

See: Convert Arc to Splines Function

Expand
titleTangify Definition

The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

See: Tangify Function

See: Tangify All Circuits Function

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Image RemovedImage Removed
Remove Layers
Image AddedImage Added

Trace the Design

  • Go to the Set Bevels Tab.

  • Select and delete two Two of the layers by clicking Remove.

  • The two layers we will trace this design on will remain.

Trace, Save, Cut

  • Trace, Save and Cut the design.

Expand
titleBevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Removed

  • Click on the Top Layer.

  • Hold down the Ctrl key and click on the each of the outside openings.

  • Select the desired Bevel Type then click Set.

  • The outside openings of this design turn the color of the Bevel Type selected.

OvalTraceTop70800.pngImage Added

  • Click on the Bottom Layer.

  • Hold down the Ctrl key and click on the each of the inside openings.

  • Select the desired Bevel Type then click Set.

  • The inside openings of this design turn the color of the Bevel Type selected.

  • The design is now completely traced.

OvalTraceBottom70800.pngImage Added

Save and Cut

  • Save and Cut the design.

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

See: Tracing the Design

Image RemovedImage Added

Comparison

You can see how much we changed the design when you compare it to the original version.

Image RemovedImage AddedImage RemovedImage Added