Not Cutting the Outside | |
|---|---|
Select Off from the Outside Cut Options dropdown control to not cut the outside of the mat on the CMC Z1 and Z (9000z). | |
Select Off from the Outside Cut Options dropdown control. The outside of the mat will not be cut. |  |
Optionally, click the Cut the Outside Toggle to Off. The outside of the mat will not be cut. |  |
Advanced Outside Options | |
|---|---|
Optionally, click Set Advanced Options to access the Advanced Outside Cut Options. |  |
Set Cut Mode to Off. The Cut Mode matches the selections from the Outside Cut Options as described above. Click OK. |  |
The outside of the mat will not be cut. | |
Set the Default for Cutting the Outside | |
|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |  |
Set the Default for the Advanced Options | |
|---|---|
The default setting for the Advanced Options can be set in the Admin > Cutting section. |  |
Set the Default for the Cut Mode | |
|---|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section. |  |