Versions Compared

Old Version 11

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 12

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

90 Degree Drop

The 90 Degree Cartridge cuts the drop with a 90° cut and leaves no bevel. 

Select the 90 Degree Drop Bevel Type

Select the 90° Tab on the Configurations screen.

Select the specific Drop bevel type from the Current Bevel Type dropdown control. 

Bevel displayed for clarity - the 90° Cartridge cuts with no bevel displayed.

  • Normal Drop

  • Normal Drop-Front of Mat

Select the Area of Concern for 90 Degree Drops Below:

Blade Depth for

90 Degree Drop

is Incorrect

Cuts the Wrong Depth When Using a SKU

Select this topic to adjust the Depth Bias.

90 Degree Drop Does Not Pause for Blade Change when Cutting

90 Degree Drop

Select this topic to adjust the Plunge Count.

Using the

90 Degree Circle/Oval

Rotation Button Utility for Adjusting the 90 Degree

Drop Rotation Adjustments Using the Circle/Oval

Drop

Rotation Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

90 Degree Drop Exterior Backup is too Long

on 90 Degree Drop

Select this topic to adjust the Exterior Backup.

90 Degree Drop Exterior Backup is too

Short on 90 Degree Drop

Short

Select this topic to adjust the Exterior Backup.

90 Degree Drop Exterior Overcut is too Long

on 90 Degree Drop

Select this topic to adjust the Exterior Overcut.

90 Degree Drop Exterior Overcut is too Short

on 90 Degree Drop

Select this topic to adjust the Exterior Overcut.

90 Degree Drop Interior Backup is too Long

on 90 Degree Drop

Select this topic to adjust the Interior Backup.

90 Degree Drop Interior Backup is too Short

on 90 Degree Drop

Select this topic to adjust the Interior Backup.

90 Degree Drop Interior Overcut is too

Long on 90 Degree Drop

Long

Select this topic to adjust the Interior Overcut.

90 Degree Drop Interior Overcut is too

Short on 90 Degree Drop

Short

Select this topic to adjust the Interior Overcut.

...