45 Degree Plus Outside | |
|---|---|
The 45 Degree Plus Cartridge* cuts the outside with a 45° bevel on thicker matboard such as 8-ply. *Older systems may have a yellow plastic 45°+ Cartridge. |  |
Select the 45 Degree Plus Outside Bevel Type | |
|---|---|
Select the 45°+ Tab on the Configurations screen. Select the specific Outside bevel type from the Current Bevel Type dropdown control.
|  |
Select the Area of Concern for the 45 Degree Plus Outside Cut Below: |
|---|
Blade Depth for 45 Degree Plus Outside is Incorrect when Using a SKU | |
|---|---|
Select this topic to adjust the Depth Bias. |  |
Does Not Pause for Blade Change when Cutting the 45 Degree Plus Outside | |
|---|---|
Select this topic to adjust the Plunge Count. |  |
Using the Circle/Oval Rotation Button Utility for Adjusting the 45 Degree Plus Circle/Oval Outside | |
|---|---|
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals. |  |
Exterior Backup is too Long on 45 Degree Plus Outside | |
|---|---|
Select this topic to adjust the Exterior Backup. |  |
Exterior Backup is too Short on 45 Degree Plus Outside | |
|---|---|
Select this topic to adjust the Exterior Backup. |  |
Exterior Overcut is too Long on 45 Degree Plus Outside | |
|---|---|
Select this topic to adjust the Exterior Overcut. |  |
Exterior Overcut is too Short on 45 Degree Plus Outside | |
|---|---|
Select this topic to adjust the Exterior Overcut. |  |
Interior Backup is too Long on 45 Degree Plus Outside | |
|---|---|
Select this topic to adjust the Interior Backup. |  |
Interior Backup is too Short on 45 Degree Plus Outside | |
|---|---|
Select this topic to adjust the Interior Backup. |  |
Interior Overcut is too Long on 45 Degree Plus Outside | |
|---|---|
Select this topic to adjust the Interior Overcut. |  |
Interior Overcut is too Short 45 Degree Plus Outside | |
|---|---|
Select this topic to adjust the Interior Overcut. |  |
45 Degree Plus Outside Cuts the WrongSize 45 Degree Plus OutsideSize | |
|---|---|
Select this topic to adjust the Opening Adjustment. |  |
45 Degree Plus Outside has a Swoop Swoop | |
|---|---|
Select this topic to adjust the Rotation. |  |
45 Degree Plus Outside has a Flare Flare | |
|---|---|
Select this topic to adjust the Rotation. |  |
45 Degree Plus Oval Outside has a Bump Bump | |
|---|---|
Select this topic to adjust the Oval Rotation. |  |
45 Degree Plus Oval Outside has a Feather Feather | |
|---|---|
Select this topic to adjust the Oval Rotation. |  |
Troubleshooting Button Button | |
|---|---|
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. |  |