Versions Compared

Old Version 16

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 17

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

45 Degree Plus Drop

The 45 Degree Plus Cartridge* cuts the drop with a 45° bevel on thicker matboard such as 8-ply. 

*Older systems may have a yellow plastic 45°+ Cartridge.

Select the 45 Degree Plus Drop Bevel Type

Select the 45°+ Tab on the Configurations screen. 

Select the specific Drop bevel type from the Current Bevel Type dropdown control.

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

Select the Area of Concern for 45 Degree Plus Drops Below:

Blade Depth for

45 Degree Plus Drop

is Incorrect

Cuts the Wrong Depth When Using a SKU

Select this topic to adjust the Depth Bias.

45 Degree Plus Drop Does Not Pause for Blade Change When Cutting

the 45 Degree Plus Drop

Select this topic to adjust the Plunge Count.

Using the

45 Degree Plus Circle/Oval

Rotation Button Utility for Adjusting the 45 Degree Plus

Drop Rotation Adjustments Using the Circle/Oval

Drop

Rotation Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

45 Degree Plus Drop Exterior Backup is too

Long on 45 Degree Plus Drop

Long

Select this topic to adjust the Exterior Backup.

45 Degree Plus Drop Exterior Backup is too

Short on 45 Degree Plus Drop

Short

Select this topic to adjust the Exterior Backup.

45 Degree Plus Drop Exterior Overcut is too Long

on 45 Degree Plus Drop

Select this topic to adjust the Exterior Overcut.

45 Degree Plus Drop Exterior Overcut is too Short

on 45 Degree Plus Drop

Select this topic to adjust the Exterior Overcut.

45 Degree Plus Drop Interior Backup is too

Long on 45 Degree Plus Drop

Long

Select this topic to adjust the Interior Backup.

45 Degree Plus Drop Interior Backup is too

Short on 45 Degree Plus Drop

Short

Select this topic to adjust the Interior Backup.

45 Degree Plus Drop Interior Overcut is too

Long on 45 Degree Plus Drop

Long

Select this topic to adjust the Interior Overcut.

45 Degree Plus Drop Interior Overcut is too

Short on 45 Degree Plus Drop

Short

Select this topic to adjust the Interior Overcut.

...