Page Comparison

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

52 Degree V-Groove
The 52 Degree Cartridge cuts the V-Groove with a 52° bevel.

Select the 52 Degree V-Groove Bevel Type

Select the 52° Tab on the Configurations screen.

Select V-Groove from the Current Bevel Type dropdown control.

Select the Area of Concern for 52 Degree V-Grooves Below:

52 Degree V-Groove Cuts in the Wrong Place Horizontally
Select this topic to adjust the Horizontal Home.

52 Degree V-Groove Cuts in the Wrong Place Vertically
Select this topic to adjust the Vertical Home.

Blade Depth for 52 Degree V-Groove is Incorrect When Using a SKU
Select this topic to adjust the Depth Bias.

Does Not Pause for Blade Change when Cutting 52 Degree V-Groove
Select this topic to adjust the Plunge Count.

Using the Circle/Oval Rotation Button Utility for 52 Degree Circle/Oval V-Groove
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

Exterior Backup is too Long on 52 Degree V-Groove
Select this topic to adjust the Exterior Backup.

Exterior Backup is too

Short

Short on 52 Degree V-Groove

Select this topic to adjust the Exterior Backup.

Exterior Overcut is too Long on 52 Degree V-Groove
Select this topic to adjust the Exterior Overcut.

Exterior Overcut is too Short on 52 Degree V-Groove
Select this topic to adjust the Exterior Overcut.

Interior Backup is too Long on 52 Degree V-Groove
Select this topic to adjust the Interior Backup.

Interior Backup is too Short on 52 Degree V-Groove
Select this topic to adjust the Interior Backup.

Interior Overcut is too

Long

Long on 52 Degree V-Groove

Select this topic to adjust the Interior Overcut.

Interior Overcut is too

Short

Short on 52 Degree V-Groove

Select this topic to adjust the Interior Overcut.

52 Degree V-Groove Cuts the Wrong Size
Select this topic to adjust the Opening Adjustment.

52 Degree V-Groove Cuts too Thin
Select this topic to adjust the Width Adjustment.

52 Degree V-Groove Cuts too Thick
Select this topic to adjust the Width Adjustment.

52 Degree V-Groove has an Outside Swoop
Select this topic to adjust the Outside Rotation.

52 Degree V-Groove has an Outside Flare
Select this topic to adjust the Outside Rotation.

52 Degree V-Groove has an Inside Swoop
Select this topic to adjust the Inside Rotation.

52 Degree V-Groove has an Inside Flare
Select this topic to adjust the Inside Rotation.

Oval 52 Degree V-Groove has an Outside Bump
Select this topic to adjust the Outside Oval Rotation.

Oval 52 Degree V-Groove has an Outside Feather
Select this topic to adjust the Outside Oval Rotation.

Oval 52 Degree V-Groove has an Inside Bump
Select this topic to adjust the Inside Oval Rotation.

Oval 52 Degree V-Groove has an Inside Feather
Select this topic to adjust the Inside Oval Rotation.

...