Page Comparison

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Added

See: Template Properties

See: Template Library

• Click on the Properties tab.

• Click on the Parameters tab.

• Change the No. of Points to 6.

• Change the Spikiness to 0.

• Change the Mode to 2. 

• Change the Line Length to 2.

The Parameters are a set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

Image Added

• Place a one Layer 2.75 x 2.75" #102 Oval Template in the top portion of the Polygon.

  • The circle will create the petal of the Doily.

• Move the circle so that it lines up with the Top of the Star Template.

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Added

See: Template Properties

See: Template Library

• Bring the design into Trace via the Right-Click Menu* or from the Cut Preview Screen.

  • *If you use the Right-Click method, hold down the CTRL key and select both openings before selecting Convert to CutArt. 

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and resized and rotated. edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Added

See: Add CutArt Function

• We will add some Alignment Lines that we will use to Mirror the circle.

• You can Mirror the circle without the Alignment Lines, but adding them will help illustrate the process.

• Click the Line button on the Trace and Draw tab. The Draw radio button is automatically selected.

• Right-Click on the center point of one of the Lines of the Polygon. 

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position (called an Anchor) and the Terminating Position (which are called “anchors”called an Anchor).

After it is drawn, a third point in the Center is will be displayed, which can be moved to alter the Line line into an Arc.

Image Added

See: Line Tool Function

The Mirror function will create a mirror Mirror copy of the selected object along a the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

• Right-Click on the center point of the opposite Line of the Polygon.

• The Line is placed.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position (called an Anchor) and the Terminating Position (which are called “anchors”called an Anchor).

After it is drawn, a third point in the Center is will be displayed, which can be moved to alter the Line line into an Arc.

Image Added

See: Line Tool Function

• Do the same with the other sides of the polygon, Right-Clicking and Snapping to the Center Point then Snapping to the Center Point on the opposite point.

• Make sure that the Circle crosses over the Lines a little in order to have the Mirrored version of the Circle overlap.

• If it doesn't, either make the Circle larger or Offset it to make it larger.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position (called an Anchor) and the Terminating Position (which are called “anchors”called an Anchor).

After it is drawn, a third point in the Center is will be displayed, which can be moved to alter the Line line into an Arc..

Image Added

See: Line Tool Function

The Mirror function will create a mirror Mirror copy of the selected object along a the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Revealfield.

Image Added

See: Offset Function in Trace.

• Click on the Edit radio button.

• Hold down the CTRL key and click on the Circle.

• Click the Mirror button.

The Mirror function will create a mirror Mirror copy of the selected object along a selected axis in Trace and Visualize.the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

• Right-Click on the point where the Upper Left Line begins.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position (called an Anchor) and the Terminating Position (which are called “anchors”called an Anchor).

After it is drawn, a third point in the Center is will be displayed, which can be moved to alter the Line line into an Arc.

Image Added

See: Line Tool Function

• Right-Click on the end of the line at the Lower Right Side.

• The Circle as been Mirrored using the Line we drew as the axis.

The Mirror function will create a mirror Mirror copy of the selected object along a the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position (called an Anchor) and the Terminating Position (which are called “anchors”called an Anchor).

After it is drawn, a third point in the Center is will be displayed, which can be moved to alter the Line line into an Arc.

Image Added

See: Line Tool Function

• Click on the new Circle. 

• Click the Mirror button.

• Right-Click at each end of the Alignment Line.

The Mirror function will create a mirror Mirror copy of the selected object along a the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

• The Circle has been Mirrored using the Line we drew as the axis.

The Mirror function will create a mirror Mirror copy of the selected object along a the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position Initial Position (called an Anchor) and the Terminating Position (which are called “anchors”called an Anchor).

After it is drawn, a third point in the Center is will be displayed, which can be moved to alter the Line line into an Arc.

Image Added

See: Line Tool Function

• Repeat the process by selecting the next Circle, clicking the Mirror button, then snapping to each end of the Alignment Line.

The Mirror function will create a mirror Mirror copy of the selected object along a the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position (called an Anchor) and the Terminating Position (which are called “anchors”called an Anchor).

After it is drawn, a third point in the Center is will be displayed, which can be moved to alter the Line line into an Arc.

Image Added

See: Line Tool Function

• The Circle has been Mirrored all the way around the design.

The Mirror function will create a mirror Mirror copy of the selected object along a the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

• Now we want to Break All of the Intersections where all segments in the design intersect with other segments.

• Click Edit > Break all Intersections.

The Break Tool tool is used to Bisect the selected segments Selected Segments at the points point where they Intersect in the Trace software.

The Break All Intersections function bisect bisects ALL segments Segments in the design at the points where they intersect with another segment in the Trace software.

Image Added

See: Break All Intersections Function

• The Intersections are now Broken where the objects crossed over each other.

The Break Tool tool is used to Bisect the selected segments Selected Segments at the points point where they Intersect in the Trace software.

The Break All Intersections function bisect bisects ALL segments Segments in the design at the points where they intersect with another segment in the Trace software.

Image Added

See: Break All Intersections Function

• We will now Join all of the segments that will make up the opening of the design.

• Hold down the CTRL key and click on the each of the Left Side Arcs of one of the Broken Circles.

• Click the Join button.

The Join Join button will connect the selected segments Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments All Adjacent Segments together in Trace.

Image Added

See: Join Tool Function

See: Auto Join Segments Function

• The Arcs are joined together as a single entity.

• If the Arcs don't connect as expected, you might have missed an Arc.

  • Click the Undo button, reselect the Arcs and click the Join button again. 

The Arc Tooltool tool function allows you to draw athree-point mathematically defined curve arc in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle"called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc.

Splines are easier to handle in the software than Arcs for tangification and the conversion process when going to the Cut Preview.

Arcs are still provided in the software for those that prefer to draw with them, but the the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines process will convert them to Splines for software simplification purposes.the Arcs to Splines which are easier to tangify to make cuts smoother.

Image Added

See: Arc Tool in Trace

See: Arc Tool Definition 

See: Splines Definition

See: Convert Arc to Splines Function

The The Curve button function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the

Initial Position and the Terminating Position (which are called "Anchors") and called an Anchor)

Two Separate Middle Points (which are called " Handles") , which can be moved to change alter the shape of the Curve.

Terminating Position (called an Anchor)

Splines are easier to handle in the software than Arcs for tangification and the conversion process when going to the Cut Previewwhich makes the cuts smoother between arcs.

The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

Arcs are still provided in the software for those that prefer to draw with them, but the .

Image Added

See: Arc Tool in Trace

See: Arc Tool Definition 

See: Splines Definition

See: Convert Arc to Splines process will convert them to Splines for software simplification purposes.Function

The Join Join button will connect the selected segments Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments All Adjacent Segments together in Trace.

Image Added

See: Join Tool Function

See: Auto Join Segments Function

• Hold down the CTRL key and select the Arcs of the next Broken Circle.

• Click the Join button. 

The Arc Tooltool tool function allows you to draw athree-point mathematically defined curve arc in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle"called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc.

Splines are easier to handle in the software than Arcs for tangification and the conversion process when going to the Cut Preview.

Arcs are still provided in the software for those that prefer to draw with them, but the Convert Arc to Splines process will convert them to Splines for software simplification purposes.shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

Image Added

See: Arc Tool in Trace

See: Arc Tool Definition 

See: Splines Definition

See: Convert Arc to Splines Function

The The Curvebutton function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and called an Anchor), Two Separate Middle Points (which are called " Handles") , which can be moved to change alter the shape of the Curve.

Splines are easier to handle in the software than Arcs for tangification and the conversion process when going to the Cut Preview.

Arcs are still provided in the software for those that prefer to draw with them, but the Convert Arc to Splines process will convert them to Splines for software simplification purposes., and the Terminating Position (called an Anchor)

The Convert Arc to Splines process will convert any Arcs to Splines/Curves which are easier to tangify to make cuts smoother.

Image Added

See: Arc Definition

See: Arcs Tool Function

See: Splines Definition

See: Splines Tool Function

See: Convert Arc to Splines Function

The Join Join button will connect the selected segments Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments All Adjacent Segments together in Trace.

Image Added

See: Join Tool Function

See: Auto Join Segments Function

• Continue selecting the arcs that make up each of the Broken Circles and Joining them until you have Joined each of the outside Arcs.

• Hold down the CTRL key and select all of the newly joined Arcs. 

• Click the Join button.

The Arc Tooltool tool function allows you to draw athree-point mathematically defined curve arc in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle"called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines process will convert the Arcs to Splines which are easier to handle in the software than Arcs for tangification and the conversion process when going to the Cut Preview.Arcs are still provided in the software for those that prefer to draw with them, but the Convert Arc to Splines process will convert them to Splines for software simplification purposes.tangify to make cuts smoother.

Image Added

See: Arc Tool in Trace

See: Arc Tool Definition 

See: Splines Definition

See: Convert Arc to Splines Function

The The Curve button function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the

Initial Position and the Terminating Position (which are called "Anchors") and called an Anchor)

Two Separate Middle Points (which are called " Handles") , which can be moved to change alter the shape of the Curve..

Terminating Position (called an Anchor)

Splines are easier to handle in the software than Arcs for tangification and the conversion process when going to the Cut Previewwhich makes the cuts smoother between arcs.

The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

Arcs are still provided in the software for those that prefer to draw with them, but the .

Image Added

See: Arc Tool in Trace

See: Arc Tool Definition 

See: Splines Definition

See: Convert Arc to Splines process will convert them to Splines for software simplification purposes.Function

The Join Join button will connect the selected segments Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments All Adjacent Segments together in Trace..

Image Added

See: Join Tool Function

See: Auto Join Segments Function

• The Arcs are now one connected entity.

• Trace the CutArt.

• Save the CutArt. You will get a message stating that this design contains objects that do not have an assigned bevel type. This refers to the leftover lines and arcs that we didn't trace. Click Yes that you wish to continue.

• Load the CutArt.

• Cut the CutArt.

• Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

• The Doily design is completed.

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Added

See: Tracing the Design

The Bevel Type is the Angle that refers to the angle at which the blade cuts on the Matboard/Fallout surface of the matboard when it is not cut at a 90° Right Angle.deviates from the 90° right angle cut.

Image Added

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and resized and rotated. edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Added

See: Add CutArt Function

• For an optional design, you can Offset the Doily we created to add additional layers.

• You will perform the same steps that we did back in Lesson One: Adjust an Object Freehand.

• Move the design further into the screen if necessary in order to be able to see the Offset Layer.

• Select the Doily.

• Change the Offset direction* to minus (-) by selecting it from the dropdown control.

• Leave the Reveal value at .25".

• Click the Offset Circuit button.  

• The Doily is now offset to create the second Layer.

Enclosed Objects:

Positive value Offsets to the Inside.

Negative value Offsets to the Outside.

Arcs and Curves Greater than 180 Degrees use the same rules as for closed objects.

For Lines, imagine a line's start point to be the center of a circle. The Plus offsets Clockwise and Minus offsets Counter-Clockwise. 

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Revealfield.

Image Added

See: Offset Function in Trace.

In a two-layer design, the Reveal is the amount of the bottom matboard showing under the top mat in Designer and Visualize.

The standard Reveal between the top and bottom mat is 1/4".

Image Added

See: Designer Reveal Function

• The new Offset created Arcs that overlap in the corners.

• We want to Break the Intersections in the newly Offset object, rather than all of the Intersections in the design.

• Hold down the CTRL key and select all of the newly created Arcs. 

• Click the Break button to Break the objects where they intersect with each other.

• The Arcs will break where they Intersect and appear Gray.

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Revealfield.

Image Added

See: Offset Function in Trace.

The Arc Tooltool tool function allows you to draw athree-point mathematically defined curve arc in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle"called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines process will convert the Arcs to Splines which are easier to handle in the software than Arcs for tangification and the conversion process when going to the Cut Preview.Arcs are still provided in the software for those that prefer to draw with them, but the Convert Arc to Splines process will convert them to Splines for software simplification purposes.tangify to make cuts smoother.

Image Added

See: Arc Tool in Trace

See: Arc Tool Definition 

See: Splines Definition

See: Convert Arc to Splines Function

The Break Tool tool is used to Bisect the selected segments Selected Segments at the points point where they Intersect in the Trace software.

The Break All Intersections function bisect bisects ALL segments Segments in the design at the points where they intersect with another segment in the Trace software.

Image Modified

See: Break All Intersections Function

• We will now Join all of the segments that will make up the outside Layer of the design.

• Hold down the CTRL key and click on the each of the Arcs that make up the outside layer of the design.

• Click the Join button.

The Join Join button will connect the selected segments Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments All Adjacent Segments together in Trace.

Image Added

See: Join Tool Function

See: Auto Join Segments Function

• The segments of the outside Layer are now Joined to create one object.

The Join Join button will connect the selected segments Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments All Adjacent Segments together in Trace.

Image Added

See: Join Tool Function

See: Auto Join Segments Function

• We could repeat these same steps to add a third Layer using a 1/8" reveal by Offsetting the outside object by .125", Breaking the newly Offset object, then Rejoining the outside elements to create the top Layer.

• Depending upon the Template, the size, the Parameters, etc., you may not need to Breakthe elements before Joining them together if the Offset connects together neatly in the corners.

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Revealfield.

Image Added

See: Offset Function in Trace.

The Break Tool tool is used to Bisect the selected segments Selected Segments at the points point where they Intersect in the Trace software.

The Break All Intersections function bisect bisects ALL segments Segments in the design at the points where they intersect with another segment in the Trace software.

Image Added

See: Break All Intersections Function

The Join Join button will connect the selected segments Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments All Adjacent Segments together in Trace.

Image Added

See: Join Tool Function

See: Auto Join Segments Function

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Added

See: Template Properties

See: Template Library

The Parameters are a set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

Image Added

• Trace the CutArt. Remember to Add a layer in the Layers section for each layer of matboard you want to trace. Click on the desired layer, select the object to trace, then select the bevel/cartridge to trace the item for that layer.

• Save the CutArt. You will get a message stating that this design contains objects that do not have an assigned bevel type. This refers to the leftover lines and arcs that we didn't trace. Click Yes that you wish to continue.

• Load the CutArt.

• Cut the CutArt.

• Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

• The multi-layered Doily design is completed.

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Added

See: Tracing the Design

The Bevel Type is the Angle that refers to the angle at which the blade cuts on the Matboard/Fallout surface of the matboard when it is not cut at a 90° Right Angle.deviates from the 90° right angle cut.

Image Added

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and resized and rotated. edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Added

See: Add CutArt Function