Outside Cut OptionsUse the Outside Cut Options dropdown control to select how the outside of the mat is cut on the CMC Z1 and 9000z. | |
|---|---|
Select the desired outside cut option from the Outside Cut Options dropdown control. |  |
...
Advanced Outside Options | |
|---|---|
Optionally, click Set Advanced Options to access the Advanced Outside Cut Options. Set the desired Cut Mode to select how the outside cut will be cut. These match the selections from the Outside Cut Options as described above. |  |
Set the Default for Cutting the Outside | |
|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |  |
Set the Default for 90 Degree Outside Cut | |
|---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |  |
Set the Default for the Advanced Options | |
|---|---|
The default setting for the Advanced Options can be set in the Admin > Cutting section. |  |
Set the Default for the Cut Mode | |
|---|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section. |  |