...
Jersey Neckline | |
|---|---|
Place a 17 x 17 one layer #402: Classic template on the FrameShop Design Editor. Click on the Parameters tab and change the Radius to 6. This controls the arc of the neckline. Enter 45 in the Rotation field. We now have the neckline. Move it to the top of the mat. |  |
...
Trace, Save, Cut | |
|---|---|
Save the CutArt. You will get a message stating that this design contains objects that do not have an assigned bevel type. This refers to the leftover lines that we didn't trace. Click Yes that you wish to continue. Optionally, you can also bring the CutArt straight to the Cut Preview from Trace. The jersey design is completed. |   |
Optional Design | |
|---|---|
We can even create an optional format by not adding in the shoulders and arms to the design. Jersey NecklinePlace a 17x17 17 x 17 one layer #402: Classic template on the mat FrameShop Design Editor. Click on the Parameters tab and change the Radius to 6. This controls the arc of the neckline and the arm holes. Enter 45 in the Rotation field. We now have the neckline and arm holes. Move it to the top of the mat. | |
Jersey Body | |
|---|---|
Bring over a 15.5625x16 5625 x 16 one layer #101: Rectangle template. Align it so that it makes the body portion of the jersey. |  |
...
Comparison | |
|---|---|
You can see how much we changed the design when you compare it to what we started with. | |
Jersey Design:  |
|
Alternative Jersey Design:  |
|
