Editing the 45 Degree Plus Configurations

The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°.

The 45°+ Blade Cartridge is not selected within the Editor; it is set by using a Blade Depth above 16 on the Cut Preview.

• Older systems may have a 45°+ Yellow Plastic Blade Cartridge. 

 Use the Configurations screen to adjust how the Editing the 45 Degree Plus Configurations is being cut.

With the desired design on the Cut Preview screen, click the Configurations button to open the Configurations screen.

Select the 45 Degree Plus Cartridge tab to edit the Configurations for the 45 Degree Plus Cartridge.