Change to the 45 Degree Plus Cartridge

Change to the 45 Plus Degree Blade Cartridge

Change to the 45 Plus Degree Blade Cartridge

  • The 45°+ Cartridge cuts the Bevel Angle on the thicker matboard at 45°.

    • The 45°+ Blade Cartridge supports Blade Depths above 16.

  • The Black 45°+ Blade Cartridge is labeled with a 45° Angle Symbol and Plus Symbol on the Cartridge end.

    • *Older systems may have a 45°+ Yellow Plastic Blade Cartridge. 

 

End45PlusCartridge70800.png
45°+ Blade Cartridge End
  • Your hardware may look different than the model pictured, but the process is still the same.

  • Push the Blade Cartridge release lever down to eject the Blade Cartridge.

 

Push the Blade Cartridge Release Lever Down to Eject the Current Cartridge
  • Insert the new Cartridge into the Head with the Blade facing toward the Board and the notch on the back of the Cartridge facing the Head.

  • It should click into place.

    • It can only be inserted one way.

Turn Cartridge Over and Reinsert into the Head