Select the Configurations Section to Edit

Select the Configuration Section to Edit
Editing the Configurations Information on editing the Configurations.
Configurations Menu Information on the Configurations Menu items.
Cartridge Type Tab Information on the Cartridge Type Tabs.
Cartridge Type Examples Examples of the different Cartridge Types.
Tool Configs Information on the Tool Configs.
Circle/Oval Rotation Utility Information on the Circle/Oval Rotation Utility for Circle/Oval calibration.
User Configurations Information on the User Configs section.
Current Bevel Type Dropdown Control Information on the bevel types on the Current Bevel Type Dropdown Control.
Bevel Type Examples Example of the Bevel Type Examples that can be cut with the bladed cartridges.
Backups and Overcuts Information on adjusting the Backups and Overcuts to control where the blade specifically plunges in and retracts from the matboard or fallout when cutting objects.
Opening Adjustment Information on adjusting the Opening Adjustment to control specifically the size of the opening.
Rotation Information on adjusting the Rotation to control specifically for Swoops and Flares in a non-oval opening.
Oval Rotation Information on adjusting the Oval Rotation to control specifically for Feathers and Bumps in an oval opening.
Width Adjustment (V-Groove) Information on editing the V-Groove width.
Outside Rotation (V-Groove) Information on editing the Non-Oval V-Groove for a Swoop and Flare on the outside cut of a V-Groove.
Inside Rotation (V-Groove) Information on editing the Non-Oval V-Groove for a Swoop or Flare on the Inside cut of a V-Groove.
Outside Oval Rotation (V-Groove) Information on editing the Oval V-Groove for a Feather or Bump on the Outside cut of an Oval V-Groove.
Inside Oval Rotation (V-Groove) Information on editing the Oval V-Groove for a Feather or Bump on the Inside cut of an Oval V-Groove.
Horizontal Adjustment (Tool Specific) Information on editing the Horizontal placement for the Deboss, Pen or Vinyl tool.
Vertical Adjustment (Tool Specific) Information on editing the Vertical placement for the Deboss, Pen or Vinyl tool.
Depth Setting (Tool Specific) Information on selecting the optimum Blade Depth for the Deboss, Pen or Vinyl tool.
Corner Pause (ms) (Tool Specific) Information on editing the amount of time to Pause in the corners when applying the Deboss, Pen or Vinyl tool.
Overshoot (Tool Specific) Information on editing how much to Overshoot past the end of the segment for the Deboss, Pen or Vinyl tool.
Plunge (Tool Specific) Information on editing whether to Plunge or Unplunge between segments of an object when doing a Deboss, Pen or Vinyl object.
Install Pen Information on using the Install Pen utility to calibrate the Pen Cartridge.
Troubleshooting Button Information on editing with the Troubleshooting utility to make quick edits for a single object on the Cutting Preview.
Configuration Map Information on the Configuration Map to determine the external/internal backups/overcuts for the selected cartridge and bevel type.
Quick Calibration Information on doing a Quick Calibration to make sure that the opening is the right size, cut in the right place, and adjust the backups/overcuts and correct for Swoops/Flares.
Bevel Type Cutting Direction Information on the Bevel Type Cutting Direction.

Select the Configuration Section to Edit