V-Groove

A Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement.

The matboard is sliced halfway through the thickness and the matboard core is visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• First Cut: Cuts the Interior cut into the Fallout Clockwise.

• Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type Dropdown Control in the Configurations to edit this configuration.

Note: Tracing the design using the OutGroove (Outside cut of the V-Groove) or the InGroove (Inside cut of the V-Groove) bevels in Trace cannot be saved with the design.

• The design must be taken directly to the Cutting Preview after tracing it.