Clamp Switch Regulator Replacement Instructions

Owned by dani.simmonds
Last updated: May 24, 2024
3 min read

Replacing the AirGlide Clamp Switch

Replacing the AirGlide Clamp Switch

  • Disconnect the air supply from the AirGlide.

  • On the back of the AirGlide at the base of the backing board, loosen the three bolts on the left side backing board stabilizer.

Loosen the Three Bolts on the Left Side Backing Board Stabilizer

  • Carefully remove the backing board.

Carefully Remove the Backing Board

  • Remove the nut on the front of the Clamp Switch.