Circuit List: Trace

Circuit List

Circuit List

  • The Circuit List will display a List of the Circuits located on the design along with details about them.

    • Circuits are enclosed objects.

Layer

  • The Layer column displays what Layer the object is located on if it is Traced.

    • If it is not traced, the circuits reside on layer 1.

Start

  • The Start column displays the Start X/Y Coordinates of the object's start point when drawn.

  • If you clicked on the upper left and drew by dragging to the lower right, that would make the start point on the upper left corner. 

Size

A Circuit is an enclosed, connected object such as a Rectangle or a Polygon in Trace.

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

See: Tracing the Design

The X Position field is used to set or display the Horizontal position of the selected object in the Design Editor, Trace and the Cut Preview. 

The Y Position field is used to set or display the Vertical position of the selected object in the Design Editor, Trace and the Cut Preview.Â