Check out our new How To section at: How To...

CutArt: Explode CutArt

Owned by dani.simmonds
Last updated: Aug 12, 2024
2 min read

Explode CutArt

Explode CutArt

  • When a CutArt is placed, it is a single object.

  • The individual elements cannot be moved separately until the CutArt is Exploded or it is brought into Trace to further edit.

  • Select the desired CutArt that contains free-floating elements; i.e., not connected to other objects.

  • Click Explode CutArt on the Advanced tab to break it up into the individual objects.

  • For Additional information: Right-Click on the CutArt in the Design editor and select Explode CutArt.

  • When a CutArt is placed, it is a single object.

  • The individual elements cannot be moved separately until the CutArt is Exploded or brought into Trace to further edit.

  • Explode the CutArt to move the separate elements of the CutArt individually.

ExplodeCutArtProcess70800.png
Use Explode CutArt to Explode a CutArt into Individual Elements

See: CutArt Properties

See: Trace

The Trace utility is a Vector-Based drawing graphic program for editing/creating Vectors to either Cut or apply with a Non-Blade Tool on the CMC.

Knight70800.png
Vector Design in Trace

See: Vector Definition

See: Trace Manual