Check out our new How To section at: How To...

Matboard: Cut the Outside Editor Setting

Owned by dani.simmonds
Last updated: Aug 15, 2024
2 min read

Matboard: Cut the Outside Editor Setting

Matboard: Cut the Outside Editor Setting

  • Use the Cut the Outside checkbox to select whether or not to Cut the Outside of the mat.

    • This can also be changed on the Cut Preview.

  • When Cut the Outside is selected, the matboard displays as a Solid Color.

  • Select the Cut the Outside checkbox to cut the outside of the mat. 

The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Outside Cut Example
Outside Bevel Configurations

See: 45 Degree Outside Configurations

See: 45 Degree Plus Outside Configurations

See: 45 Degree Front Outside Configurations

See: 52 Degree Outside Configurations

See: 90 Degree Outside Configurations