Check out our new How To section at: How To...

V-Groove Width for Closed V-Groove

Owned by dani.simmonds
Last updated: Aug 14, 2024
2 min read

V-Groove Width for Closed V-Groove

V-Groove Width for Closed V-Groove

  • Set the VG Width to 0 (Zero). 

  • For Additional Information: See Width Adjustment in the Configurations for information on adjusting the V-Groove if it is cutting too narrow or too wide.

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Closed V-Groove
BevelType45VGSelect70800.jpg
Normal Bevel Closed V-Groove

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations