Box 4: Sliding Sleeves

This Box consists of two pieces of board that fold around the object and then tuck into itself to create the Box. There is no glue or adhesives to assemble the box. The Base and Lid can be Cut Separately.	The Sliding Sleeves Box
Cut out the Lid and the Base of the Box at the desired dimension.	Remove the Cut Lid and Base from CMC
Fold the Lid and the Base sections along the creased edges.	Fold the Lid and the Base Sections Along the Creased Edges
Place the Base perpendicular to the Lid at the fourth square from the end and secure with hot glue.	Place the Base Perpendicular to the Lid at the Fourth Square From the End and Secure With Hot Glue
Fold in the flap at the opposite end of the Lid.	Fold in the Flap at the Opposite End of the Lid
Fold over the flap at the opposite end of the Lid.	Fold Over the Flap at the Opposite End of the Lid
Fold over the flap at the opposite end of the Lid so that it is flat.	Fold Over the Flap at the Opposite End of the Lid so That it is Flat
Bring in the two sides of the Box over the edges of the Lid.	Bring in the Two Sides of the Box Over the Edges of the Lid
Fold the remaining flap of the Lid over the Box.	Fold the Remaining Flap of the Lid Over the Box
Tuck the remaining flap of the Lid into the Box.	Tuck the Remaining Flap of the Lid into the Box
The Box is assembled.	The Sliding Sleeves Box is Assembled

FrameShop 7x