Check out our new How To section at: How To...

Ortho Mode

Owned by dani.simmonds
Last updated: Jun 12, 2024
1 min read

  • Ortho Mode (Orthogonal) constrains the cursor movement to only the Horizontal or Vertical directions; i.e., right angles.

Ortho Mode (Orthogonal) constrains the cursor movement to only the Horizontal or Vertical directions; i.e., right angles.

In Trace, this is done by holding down the CTRL key while drawing.

Ortho Mode Line - Horizontal and Vertical Only
Ortho Mode Line - Horizontal and Vertical Only