This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Positioning Toggle: FrameShop Design Editor

Positioning Toggle

Positioning Toggle

Use the Positioning Toggle to dictate whether objects are positioned from the top layer or to the bottom layer. 

The Positioning Toggle indicates whether objects are positioned from the top layer or from the bottom layer, such as when placing V-Grooves or using the Guides, as indicated by the arrow direction.

Positioning Toggle Arrow Up positions and aligns objects from the top layer.

Positioning Toggle Arrow Down positions and aligns objects to the bottom layer. 

Set the Default for the Positioning Toggle

Set the Default for the Positioning Toggle

The default setting for the Postioning Toggle can be set in the Admin > Editor section.