This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Add CutArt: FrameShop Design Editor

Add CutArt

Add CutArt

Use the Add CutArt button to add a CutArt object to the design. CutArt are simple shapes and design elements that can be cut, drawn, or debossed.

Adding CutArt

Click the Add CutArt button on the Openings tab to open the CutArt Load Screen

Click on the appropriate CutArt Category. 

Select the desired CutArt from the thumbnails displayed. 

The CutArt is placed on the Editor.

Import Other CutArt

Import Other CutArt

See Import Content under Content for instructions on how to import CutArt files into the selected CutArt category.

Set the Default for Import Category

Set the Default for Import Category

The default setting for the Import Category when importing CutArt can be set in the Admin > Defaults section.

Edit the CutArt

Edit the CutArt

Click on a CutArt object and click on the Properties Tab to edit the CutArt Properties

See CutArt Properties for information on editing the individual proprietary adjustments available.