This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Zoom Controls: FrameShop Design Editor

Owned by dani.simmonds
Last updated: May 25, 2021
2 min read

Zoom Controls

Zoom Controls

Use the Zoom Buttons to change the project view while editing.

There are a number of Zoom buttons available for changing the view of the project on the Editor Screen.

The current zoom position is highlighted on the Navigator Thumbnail.

Zoom Window

Zoom Window

Use Zoom Window to Zoom into a specified area of the screen. 

Using Zoom Window

Using Zoom Window

Click the Zoom Window button. 

Draw a box around a specific desired area on the screen. 

The screen zooms in to that area. 

Zoom In

Zoom In

Zoom In about 50% on the screen.

Using Zoom In

Using Zoom In

Click the Zoom In button. 

The screen zooms in about 50%. 

Zoom Out

Zoom Out

Zoom Out about 50% on the screen.

Using Zoom Out

Using Zoom Out

Click the Zoom Out button. 

The screen zooms out about 50% unless the screen is already at the full screen view.

Zoom All

Zoom All

Zoom All to view the entire screen.

Using Zoom All

Using Zoom All

Click the Zoom All button. 

The entire drawing zooms out to the full screen view.Â