This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Load Server Image

Load an image into Trace from the Server that you can either draw around, draw over, or Vectorize. 

You must have the FrameShop Visualization software activated in order to load pictures from the server.

Loading a Server Image

Click the Load Server Image button.

On the Load From Server screen, locate the desired image and click on it.

Click OK.

The image is loaded into the Trace editor.

Set the Image Size

Enter the desired size for the image in the Design Bounds section. 

The image will resize.

You can now draw over the image or Vectorize it.

Save Image to Server

See Save Image to Server for instructions on how to save images to the server.

  • No labels