This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 30 Next »

45° Blade Cartridge: Cartridge Manual: CMC Z1, Z (9000z), 9000 and 8000

The 45° metal blade cartridge* is designed to cut standard 4-ply matboard. The 45° blade cartridge does not support blade depths above 16.

*Older systems may have a 45° plastic cartridge.

Selecting the 45 Degree Blade Cartridge in the Software: CMC Z1, Z (9000z), 9000 and 8000

Select this topic to see information on Selecting the 45 Degree Blade Cartridge in the Software.

Selecting the 45 Degree Blade Cartridge Outside Cut on the CMC Z1-Z (9000z)

Select this topic to see information on Selecting the 45 Degree Blade Cartridge Outside Cut on the CMC Z1-Z (9000z).

Selecting the 45 Degree Blade Cartridge Outside Cut on the CMC 9000-8000

Select this topic to see information on Selecting the 45 Degree Blade Cartridge Outside Cut on the CMC 9000-8000.

Air Pressure for Cutting with the 45 Degree Blade Cartridge with the CMC Z1, Z (9000z), and 9000 

Select this topic to see information on adjusting the Air Pressure for Cutting with the 45 Degree Blade Cartridge to cut typical matboard or dense matboard material.

Changing the Blade on the 45 Degree Cartridge on the CMC Z1, Z (9000z), 9000 and 8000

Select this topic to see information on Changing the Blade on the 45 Degree Cartridge.

Changing to the 45 Degree Blade Cartridge on the CMC Z1, Z (9000z), 9000 and 8000

Select this topic to see information on Changing to the 45 Degree Blade Cartridge.

Editing the 45 Degree Configurations on the CMC Z1, Z (9000z), 9000 and 8000  

Select this topic to see information on Editing the 45 Degree Configurations.

  • No labels