This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Changing to the 45 Degree Blade Cartridge: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
- dani.simmonds
Change to the 45° Blade Cartridge | |
|---|---|
Your cartridge may look slightly different than displayed below depending upon what CMC model you have, but changing the cartridge uses the same process. | |
The 45° blade cartridge is labeled 45° on the end and is black. |  |
Push blade cartridge release down to eject the current blade cartridge. Turn 45 degree cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head, until it clicks into place. It can only be inserted one way. |  |