This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Editing the 45 Degree Blade Cartridge Configurations: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000

Owned by dani.simmonds
Last updated: May 25, 2021
1 min read

Editing the 45 Degree Blade Cartridge Configurations

Editing the 45 Degree Blade Cartridge Configurations

Configurations

Select this topic for more information about the Configurations screen where you can adjust how the CMC is cutting with the bladed cartridges or applying the non-bladed cartridges.

The 45 Degree Cartridge cuts a 45° bevel into the matboard.   

Select the 45 Degree Cartridge tab to edit the Configurations for the 45 Degree Cartridge.

Select the Bevel Type from the Current Bevel Type dropdown control.

Select this topic to see information on Editing the 45 Degree Configurations.