">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 50 Next »

  • Select the desired Cartridge Type Tab to edit the configurations for that Cartridge.

  • Examples of the Cartridges are listed below.

45 Degree Cartridge

  • The 45° Cartridge cuts the matboard Bevel at 45°. Supports Blade Depths up to 16. Full Definition

45MetalBevelOpeningCartridge70800.png

45 Degree Plus Cartridge

  • The 45° Plus Cartridge cuts the matboard Bevel at 45° on thicker matboard. Activated by Blade Depths over 16. Full Definition

45PlusMetalBevelOpeningCartridge70800.png

45 Degree Front Cartridge

  • The 45° Front Cartridge cuts the matboard from the Front at 45°. Activated by Cut From Front options. Supports Blade Depths up to 16. Full Definition

45FrontMetalBevelOpeningCartridge70800.png

52 Degree Cartridge

  • The 52° Cartridge cuts the matboard Bevel at 52°. Supports Blade Depths up to 16. Full Definition

52BevelOpeningCartridges70800.png

90 Degree Cartridge

  • The 90° Cartridge cuts a 90° opening into the matboard, displaying no bevel.

  • The 90° Cartridge cuts the matboard at a 90° Right Angle, hiding the matboard core. Full Definition

90BevelOpeningCartridge70800.png

Crease Cartridge

PerforationCartridgeTool70800.png

Deboss Cartridges

  • The Deboss Cartridge stylus (Thin, Medium, Wide) press into the surface of the matboard to create a subtle design. Full Definition

DebossingImagesCartridges70800.png

Pen Cartridge

  • The Pen Cartridge holds a pen to the matboard to draw onto the matboard. 

  • The Pen Cartridge is used to draw onto the matboard to create a design. Full Definition

PenCartridge70800.png

Vinyl Cartridge

  • The Vinyl Cartridge cuts designs into a sheet of Vinyl which has been temporarily adhered to the matboard. 

BevelTypeExamples70800.png
  • No labels