">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 69 Next »

Inside Oval Rotation on Oval V-Grooves

🛠️ Click the Minus [-] or Plus [+] button in the desired field several times, perform a test cut, and continue adjusting until satisfied.

Feather on an Oval V-Groove

  • A Feather is a Fringe of material where the cut starts and ends on the Oval V-Groove’s Exterior or Interior cut.

    • If the Oval V-Groove’s Exterior has a Feather, Increase the Outside Oval Rotation.

    • If the Oval V-Groove’s Interior has a Feather, Decrease the Inside Oval Rotation.

OvalOutsideInsideVGrooveFeatherArrows70800.png

Full Definition: Feather in an Oval V-Groove Definition

Bump on an Oval V-Groove

  • A Bump is a Lump of material where the cut starts and ends on the Oval V-Groove’s Exterior or Interior cut.

    • If the Oval V-Groove’s Exterior has a Bump, Decrease the Outside Oval Rotation.

    • If the Oval V-Groove’s Interior has a Bump, Increase the Inside Oval Rotation.

OvalOutsideInsideVGrooveBumpArrows70800.png

Full Definition: Bump in an Oval V-Groove Definition

  • No labels