Skip to end of metadata
Go to start of metadata
The 45° Front Reverse Bevel Opening is created by cutting into the front of the matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface, hiding the matboard core from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The copper 45° Front Blade Cartridge is labeled “45°” with a Triangle Symbol on the end. The 45° Front Blade Cartridge is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview. Select Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.
|   |