">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 67 Next »

Inside Oval Rotation on Oval V-Grooves

🛠️ Click the Plus or Minus button several times on the desired field, do a test cut and continue adjusting until satisfied.

  • A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the inside/outside cut of the Oval V-Groove.

    • If Oval V-Groove Outside has a Feather, Increase the Outside Oval Rotation.

    • If Oval V-Groove Inside has a Feather, Decrease the Inside Oval Rotation.

OvalOutsideInsideVGrooveFeatherArrows70800.png

Full Definition: Feather in an Oval V-Groove Definition

  • A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the inside/outside cut of the Oval V-Groove.

    • If Oval V-Groove Outside has a Bump, Decrease the Outside Oval Rotation.

    • If Oval V-Groove Inside has a Bump, Increase the Inside Oval Rotation.

OvalOutsideInsideVGrooveBumpArrows70800.png

Full Definition: Bump in an Oval V-Groove Definition

  • No labels