">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Next »

Editing the 45 Degree Front Blade Cartridge Configurations

  • The 45° Front metal orange blade cartridge is designed to cut 45° bevels on standard 4-ply matboard from the front of the mat.

  • The 45° Front metal orange blade cartridge is labeled with a 45° with a Triangle on the end.

    • The 45° front blade cartridge does not support blade depths above 16.

 When Cutting From the Front

Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cut Preview.

  • On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

    • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

    • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

    • V-Grooves have their own selection on the list.

If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.  

  • No labels